Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Trusted Metal Roofing for Paradise Homeowners
Paradise sits where the desert wind picks up speed off the Spring Mountains, and that wind is what kills roofs here. Asphalt shingles lift at the corners, granule loss starts early, and after a summer of 110-degree afternoons the material gets brittle enough that a single monsoon gust can peel a whole slope. Metal handles that kind of punishment better than anything else we install, which is why so many Paradise homeowners are asking about it now. Our technicians have up to 30 years of experience on metal panels, standing seam, and the fasteners that actually hold them down. We’ll show you the deck photos before we talk money. Call (833) 676-0557 for a free estimate and a straight answer.
What Our Metal Roofing Service Includes
Metal roofing covers a lot of ground. Here’s what each part means when it’s on your house in Paradise.
Standing Seam Metal Roof
Standing seam is the panel profile with raised ridges that hide the fasteners, so there are no screws exposed to the weather. It’s what we recommend for homes in Paradise that catch full afternoon sun and open wind, because the panels run in long lengths and the seams do the gripping. We measure your roof, show you where the panels will break, and set them over proper underlayment so the roof vents correctly in this heat. The nailing pattern earns the wind rating, not the shingle wrapper, and the same is true for metal panel attachments.

Metal Shingle Roofing
Metal shingles give you the look of a shingle roof without the granule loss and curling that plague asphalt in Paradise. They’re stamped and coated steel or aluminum, usually in profiles that match shake or tile, so they fit a neighborhood where a flat standing seam panel wouldn’t. We install these when a homeowner wants modern durability but doesn’t want the whole street to look different. Ask us to bring samples out and you can see the profiles against your stucco before you decide.

Corrugated Metal Roofing
Corrugated metal is the classic exposed-fastener profile: wavy panels, screwed down through the face. It’s the most economical metal option and a common choice for patio covers, sheds, and outbuildings in Paradise, and it holds up fine on a home roof when it’s installed with the right screws and washers. We use it on lower-slope sections and utility structures where budget matters and the look is acceptable. On a main roof we’ll usually steer you toward a concealed-fastener option so you’re not relying on rubber washers to last 30 years.

Aluminum & Steel Roofing
Aluminum won’t rust, which matters if your home is near the reclaimed-water irrigation most Paradise neighborhoods rely on. Steel is stronger and cheaper per square but needs a proper galvalume or painted finish to survive the desert sun without fading. We walk you through which metal makes sense for your exposure, your pitch, and how close you are to the mountains. Both take a coil-coated paint finish that holds color far better than asphalt granules hold their surface.
Metal Roof Repair
Most metal roof problems we see in Paradise trace back to installation: under-driven screws, missing closures at the ridge, or panels run in the wrong direction for the prevailing wind. We find the actual leak instead of smearing sealant over it, then repair the flashing, replace the fasteners, or reset the panel. Loose fasteners are a five-minute fix per screw but a missing one can let water track a long way before it shows up inside. If your metal roof is leaking, we’ll come look at it and tell you what it really needs.
Metal Roof Coating
A coating is a reflective or elastomeric layer applied over an existing metal roof to cut heat gain and extend the panel’s life. In Paradise, where attic temperatures climb hard in July, a good reflective coating can knock real degrees off the ceiling temperature and takes some load off your air conditioner. It’s a maintenance step, not a cure-all: we inspect the panels first and only coat a roof that’s still structurally sound. If the metal is failing, we’ll say so rather than sell you a coating over a problem.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Brands We Service for Metal Roofing
Most of the metal we install comes in coil-coated steel and aluminum from the major suppliers, and we’ve set panels from Owens Corning and IKO systems alongside the standing seam profiles that dominate Paradise. We know where each one tends to wear first here: the Owens Corning granule-faced and painted products show sun fade on south slopes before anything else fails, and we’ve watched how IKO panels behave through ten summers of heat cycling.
Tamko and Atlas make up a lot of the metal and accessory hardware we work with, and we know the fastener and closure lines that pair with them so the details match the panel. Whether you have Tamko or any other make, we can help you figure out what’s failing and what it takes to fix it right.
Signs You Need Metal Roofing Right Now
- Shingles lifting or curling on the windward slope. If the ridge line or the west-facing slope is showing raised shingle tabs, the material is already losing its hold, and a single monsoon gust can peel a whole run. In Paradise we see this start earlier than most homeowners expect because the afternoon wind never lets up.
- Granules in the gutters and on the ground. A steady trail of granules means the shingle surface is breaking down and the roof is nearing the end of its life. That’s the point where replacement makes more financial sense than another patch.
- Rust streaks or chalky paint on an existing metal roof. White chalky residue on the panels means the coating is breaking down from UV exposure. Catching it early means a coating job; catching it late means replacing panels.
- Attic heat you can’t get ahead of. If the upstairs stays hot even after you’ve added insulation and run the AC hard, the roof surface is likely the problem. Metal with a reflective finish changes that equation more than any other roofing material we install.
- Repeated leaks in the same spot after repairs. If you’ve paid for the same leak twice, the underlying flashing or panel run is wrong. Call us for a free second opinion on any written estimate before you spend money on another band-aid.
Our Metal Roofing Process – Step by Step
- 1
Free inspection and measurements. We get on the roof, photograph the deck and any soft spots, and count the squares. A roof is measured in squares, and we’ll tell you how many we counted before we quote.
- 2
Written line-item estimate. You get the price broken down by material, labor, tear-off, and disposal, not a single lump number. No trip charge inside our own county, and the estimate is free.
- 3
Material and color selection. We bring samples out so you can see the finish against your stucco and trim in real daylight, not on a screen. We confirm the panel profile and fastener type before ordering.
- 4
Tear-off, deck repair, and install. We pull the old roof, fix any soft decking we find, lay down underlayment, and set the panels. Bill and his crew are on the roof throughout, not a subcontracted crew you’ve never met.
- 5
Final walkthrough and the written promise. We walk the finished roof with you, show you the details, and hand over the 90-Day Done Right Promise. If it’s not done right, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roofing Cost in Paradise?
A typical standing seam metal roof in Paradise runs $18 to $28 per square foot installed, which puts most single-story homes in the $24,000 to $42,000 range depending on square count, pitch, and how much tear-off is involved. Metal shingle comes in a bit lower, roughly $14 to $22 per square foot, and corrugated on a shop or patio cover runs $8 to $14. Metal roof repair on a small leak is usually $350 to $900, and a reflective coating on an existing sound metal roof typically lands between $2,500 and $6,000 for a standard Paradise home.
What moves the price: roof pitch and access, whether the deck has soft spots under the old material, the panel profile you choose, and how many penetrations and ridge sections need custom flashing. To avoid overpaying, ask every bidder how many squares they counted and whether tear-off and disposal are included. Our free estimates are written line-item, so you can compare apples to apples, and we’ll give you a free second opinion on any written estimate someone else handed you.
Metal Roofing Near Paradise – Our Service Area
We work all over the east valley: Paradise, Metal Roofing in Winchester, Whitney, Spring Valley, Enterprise, Henderson, Sunrise Manor, Summerlin, Las Vegas, North Las Vegas, Boulder City, and out to Sandy Valley. Most estimates in the Paradise core happen within a couple of days, and the farther out you go toward Boulder City or Sandy Valley, the more we try to group the visit with a nearby job. When a storm hits, we’re answering the phone around the clock and getting to the worst damage first.
If you’re weighing metal against other materials, our Metal Roofing in Paradise page covers the full range, and our home page lists everything we do across roof repair, replacement, tile, and gutters.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Metal Roofing in Paradise
Metal roofing is any roof made from steel, aluminum, copper, or zinc panels, installed as standing seam, stamped shingles, or corrugated sheets. It lasts longer than asphalt in this climate and reflects more of the sun’s heat. In Paradise, we usually recommend standing seam for homes and corrugated for outbuildings.
A typical single-story home in Paradise takes three to five days for tear-off and metal install, depending on square count and weather. Larger or steeper roofs run a week or more. We give you a schedule in the written estimate and stick to it.
Standing seam runs $18 to $28 per square foot installed in Paradise, metal shingle about $14 to $22, and corrugated $8 to $14. Repairs typically fall between $350 and $900. Call (833) 676-0557 for an exact quote, and the estimate is free.
Yes. We work with Owens Corning, IKO, Tamko, and Atlas metal and accessory lines regularly, and we know the fasteners and closures each panel profile needs. If your roof has a brand we haven’t named, call us and we’ll tell you what we can do.
Yes. If a panel has lifted or a storm has opened the roof up, call (833) 676-0557 and a live person answers, day or night. We get out to look at the damage and stop the water first, then talk about the repair.
Every metal roofing job comes with our written 90-Day Done Right Promise, meaning if something isn’t right, one call brings Bill back. The panels themselves carry the manufacturer’s finish and structural warranty. We’ll hand you the paperwork at the walkthrough.
Clear the driveway and any parking space near the house so the crew can stage materials, and move vehicles out of the way. If you have attic access, we’ll want to look up there too. Beyond that, we handle the roof and leave the yard clean.
We also handle Metal Roofing in Whitney and the surrounding east valley if you’re outside Paradise proper, and our related pages cover roof repair and roof replacement if metal isn’t the right fit.
Schedule Your Metal Roofing Service in Paradise Today
Paradise weather isn’t getting any gentler, and a roof that’s already lifting won’t wait. Call (833) 676-0557 for a free, no-obligation estimate on metal roofing in Paradise. A live person answers 24/7, we’ll show you the deck photos before we talk money, and every job comes with the written 90-Day Done Right Promise. Same address since 1996, same name on the truck, same owner on the roof. Ask the storm chasers where theirs is.
Written by the team at Shepherd & Sons Roofing Paradise.