Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Specialty Roofing in Paradise: What to Know First
We provide independent IKO specialty roofing in Paradise, and most standard repairs are wrapped in a single visit once the right materials are in hand. Specialty assemblies take longer. A full membrane system runs several days, not hours, and we’ll give you an honest schedule before anyone touches your roof. Pricing is upfront and written, and we don’t move a number because a bidder guessed at the pitch or missed a layer of old roofing under the shingles.
This page is for Paradise property owners who have an IKO roof, or an IKO product somewhere in a specialty assembly (a low-slope section, a solar-ready deck, a flat porch over the garage), and want it worked on by people who have actually set it. We install IKO alongside GAF, Owens Corning and CertainTeed. Call (833) 676-0557 and a real person picks up, day or night.
How IKO Products Fail – and How We Fix Them
IKO makes a wide range of products, from Cambridge shingles to their low-slope membranes, and each one fails in a way that tells you something if you know what you’re looking at. Here’s what we see in Paradise on IKO jobs, and what we do about it.
- Cambridge and Cambridge Cool shingles losing granules early on south-facing pitches. Paradise has brutal UV load, and a shingle tested in a colder climate will shed granules faster here than the wrapper suggests. When an owner finds grit in the gutter after a couple of seasons, we check ventilation and deck condition before assuming the shingle is bad. Poor attic airflow kills more shingles here than the brand does.
- IKO low-slope membranes with seam failures at the laps. IKO’s modified bitumen and TPO lines hold up well, but seams are where they go first, and the failure often traces to installation temperature rather than the material. We cut back the failed lap, clean the substrate properly, and re-seam with the correct primer and roller pressure instead of slapping a patch over it.
- Solar-ready underlayment wrinkles on IKO ties. When a solar-ready assembly pairs an IKO membrane with the mounting hardware, the wrinkles that show up after a hot summer usually come from an underlayment that was loose at install or a deck that wasn’t re-nailed flat. We pull the penetrations, re-lay the underlayment flat, and re-seal the boots.
- Edge metal lifting on built-up and modified systems. Paradise wind gusts grab marginal edge metal, and a lifted drip edge lets water back under the field. We re-secure edge metal with the right fastener pattern and sealant, and we check the nailing pattern on the whole perimeter, because that’s what earns the wind rating, not the shingle wrapper.
- Green-roof assemblies trapping moisture on the deck. If a garden roof over an IKO base was installed without a proper drainage mat or root barrier spacing, the deck stays wet and the membrane takes the beating. We diagnose the drainage first, then repair the membrane and reinstall the layers in the right order.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our IKO Specialty Roofing Process
We treat every IKO job the same way we treat any specialty roof: figure out what’s actually wrong before quoting a number.
- 1
Diagnostics. We get on the roof, photograph the deck and the failed area, and show you the pictures before we talk money. If it’s a membrane or low-slope issue, we check the substrate, not just the surface.
- 2
Parts decision. For IKO systems we use IKO-branded components where the warranty depends on it, and quality aftermarket sealants and fasteners where the OEM part is slow to source and an aftermarket equivalent is genuinely as good. We tell you which is which and why.
- 3
The repair itself. Cut back to sound material, clean and prime properly, and reinstall per the manufacturer’s published detail. No shortcuts with the torch or the primer.
- 4
The test. We check seams, penetrations and drainage before we call it done. A water test on low-slope sections tells us more than a visual pass.
- 5
Cleanup. Nails swept, debris hauled off, and the deck photos in your hand so you can see what was underneath.
- 6
The guarantee. Every job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat IKO Specialty Roofing Costs in Paradise
These are typical ranges for common IKO work in Paradise. Your number depends on the assembly, the access and how much deck repair is hiding underneath.
| Job | Typical range |
|---|---|
| IKO shingle repair (small section) | $350 – $900 |
| Low-slope membrane repair (modified bitumen or TPO) | $600 – $1,800 |
| Solar-ready underlayment re-lay and re-seal | $900 – $2,400 |
| Built-up or modified flat roof section replacement | $2,500 – $7,500 |
| Full specialty assembly replacement (per square) | $450 – $900+ |
What moves the price: access and pitch, whether the deck needs re-nailing or replacement, the number of penetrations, and how much of the assembly has to come up to make the repair hold. We give a written, line-item estimate and a free second opinion on any bid you’ve already got. Call (833) 676-0557 to schedule your free estimate.
Why Paradise Homeowners Call Shepherd & Sons Roofing Paradise for IKO Work
We’ve been at the same address since 1996, and the name on the truck is the name on the license. That matters when a storm chaser quotes one price on the phone and another at the door. We’re locally owned and owner-operated, and Bill’s own sons are on the roof with him. Our technicians have up to 30 years of experience, and they know IKO lines because they’ve set them.
We install IKO, and we also install GAF, Owens Corning, CertainTeed, Atlas, Tamko and Boral, so if a different product fits your Paradise roof better, we’ll say so. A live person answers the phone 24/7, including after a storm. Standing offers: $40 Off Any Repair Over $200, a free second opinion on any written estimate, and no trip charge inside our own county.
FAQs
It can, if the repair uses non-IKO components in a spot the warranty covers. IKO systems generally require IKO-branded materials and proper installation to keep coverage. As an independent IKO service provider, we source IKO parts where the warranty depends on it and tell you when an aftermarket part is safe and when it isn’t. Call (833) 676-0557 for a free estimate.
Yes for most standard IKO products; some specialty components take longer to source. We’ll tell you the lead time before we start so you’re not waiting on a part nobody warned you about. Call (833) 676-0557 and we’ll check availability for your system.
Repair if the failure is isolated and the rest of the assembly is sound. Replace when the seams or field are failing across the roof, or when the deck underneath is compromised. We’ll show you the deck photos and give you a straight answer. Call (833) 676-0557 for a free estimate.
A live person answers the phone day or night, and we’ll tell you honestly when we can be there. Standard repairs are usually handled quickly once materials are in hand; full specialty assemblies take days, not hours. Call (833) 676-0557 to schedule.
Not if we’ve seen the deck. We write a line-item estimate after diagnostics, and if we find something the photos didn’t show, we stop and talk to you before doing it. Call (833) 676-0557 for a free estimate.
Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.