Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Metal Roofing in Paradise: What to Know First
IKO metal roofing in Paradise typically runs $16,000 – $34,000 for a full residential re-roof and $450 – $1,200 for most repairs, and most metal jobs here are scheduled and finished within one to two weeks once materials land. We’re an independent IKO service provider, so we quote you an honest number and show you the deck before we talk money. Call (833) 676-0557 and a live person picks up.
This page is for Paradise homeowners who already have an IKO product on the roof, or who’ve settled on IKO metal and want it installed straight. If you’re still weighing brands, that’s a different conversation, and we’re glad to have it.
How IKO Products Fail – and How We Fix Them
IKO makes solid metal, but every line has its weak spots, and Paradise’s sun and wind find them. Here’s what we actually see on IKO roofs around town and what we do about it.
- Fading and chalky finish on IKO standing seam panels. The coil’s paint system takes a beating under high-desert UV, and a roof that’s chalky to the touch is shedding its coating faster than the warranty sheet implies. We wash and prep, then apply a metal roof coating rated for this climate rather than letting the substrate start to chalk through.
- Lifted fasteners and backed-out screws on corrugated IKO panels. Thermal swing on a Paradise roof works screws loose over the seasons, and once one backs out, water gets behind the panel. We reset and re-seal with the correct washer-head fasteners, replacing any that have wallowed out the hole.
- Ridge and valley leaks on IKO metal shingle installs. IKO metal shingles live or die on the nailing pattern and the flashing detail. When a previous crew under-nailed or skipped the valley underlayment, we see it as staining on the ceiling below. Our fix is to lift the affected courses, correct the nailing, and rebuild the flashing to spec.
- Dissimilar-metal corrosion at cut edges and penetrations. Where steel panels meet an aluminum vent or a copper pipe boot, galvanic corrosion eats the steel edge first. We isolate the metals with the right barrier and re-flash the penetration.
- Granule loss and edge wear on IKO metal shingle edges. On the windward gable ends, the edge courses take the brunt and start to show wear before the field does. We inspect those edges first on any IKO job, because that’s where a Paradise wind event shows up.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our IKO Metal Roofing Process
Every IKO job follows the same steps, whether it’s a repair or a full re-roof.
- 1
Diagnostics on the roof. Bill and his crew walk the roof, check the deck from underneath where we can, and photograph what we find. You see the photos before we quote a number.
- 2
Measure and count. A roof is measured in squares. We count them and put the count in writing so you can compare bids fairly.
- 3
Parts decision. We use IKO OEM components where they matter for warranty, and quality aftermarket parts where the OEM part is overpriced for the same performance. We tell you which is which.
- 4
The work. Tears off the old, checks and repairs the deck, installs underlayment, panels or shingles, and flashings to IKO’s spec, with the correct nailing pattern for the wind rating you’re paying for.
- 5
The test. We water-test the penetrations and valleys and walk the roof once more before we call it done.
- 6
The guarantee. Every roofing job carries our written 90-Day Done Right Promise. If something isn’t right, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat IKO Metal Roofing Costs in Paradise
Prices vary with roof size, pitch, and how much deck repair is hiding underneath, but here’s where most IKO metal work lands in Paradise.
| Job | Typical Range |
|---|---|
| Metal roof repair (leaks, fasteners, flashing) | $450 – $1,200 |
| Metal roof coating (clean, prep, recoat) | $3,500 – $7,500 |
| Corrugated metal section replacement | $2,200 – $5,500 |
| Standing seam or metal shingle re-roof | $16,000 – $34,000 |
What moves the number most: the square count, the pitch, whether the old roof is one layer or three, and how much of the deck needs replacing. We give you a written line-item quote, so you know what you’re paying for before anyone touches the roof. Estimates are free, and there’s no trip charge inside our own county. Call (833) 676-0557 for an exact number.
Why Paradise Homeowners Call Shepherd & Sons Roofing Paradise for IKO Work
We’re locally owned and owner-operated, with the same address since 1996 and a live person answering the phone 24/7. That matters when you’ve been burned by an outfit that quoted one price on the phone and another at the door.
Our guys know IKO because we’ve set it, repaired it, and warrantied it. Bill’s own sons are on the roof with him, and every job is backed by the written 90-Day Done Right Promise. We also install and service GAF, Owens Corning, and CertainTeed, so if IKO isn’t the right fit for your roof, we’ll tell you straight. Name the shingle and we’ve likely set it.
Ask anyone on your street. The name on the truck is the name on the license.
FAQs
No, not when it’s installed to IKO’s spec. The warranty holds as long as the panels, fasteners, and flashings meet the manufacturer’s requirements and the deck is sound. We install to spec and keep the paperwork straight so your coverage stays intact.
In most cases, yes. Common panels and fasteners are available through local suppliers, and for less common components we source them. When an OEM part costs more than a quality aftermarket equivalent that performs the same, we’ll tell you and let you decide.
It depends on how much of the roof is failing. Isolated leaks, backed-out fasteners, or one bad section usually mean repair. Widespread chalking, corrosion at seams, or leaks in several areas point to replacement. We’ll show you the photos and give you both numbers.
We answer the phone 24/7, and we’ll get a real person on the line to schedule your free second opinion on any written estimate. We’ll be there when we say we will, and you’ll know the price before anyone gets on the roof.
Call (833) 676-0557 for a free estimate on your IKO metal roofing in Paradise. We’ll show you the deck photos, count the squares with you, and give you a straight number.
Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.