Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Gutter Replacement: The Paradise Owner’s Guide
Gutter replacement on a home that carries IKO gutter components in Paradise usually runs $1,450 to $3,900 installed for a typical single-story or two-story house, and we schedule most of these as planned work within a week or two rather than same-day. IKO is known mainly for shingles, so when we say “IKO gutter replacement” we mean matching new gutter and hanger hardware to the roof edge your IKO roof system was built around, not a discontinued IKO gutter line. Owners in Paradise usually find out something failed the same way: a rust stain running down the fascia behind the gutter, water sheeting off the roof edge and pooling at the foundation after a monsoon, or a section of gutter sagging away from the roofline where a hanger pulled free.
Key Takeaways
- IKO’s core business is roofing shingles and accessories, not gutter systems. We treat your IKO roof as the anchor and match gutter hardware to it.
- Installed gutter replacement in Paradise typically lands between $1,450 and $3,900 depending on run length, stories, and material.
- We are an independent roofing and gutter contractor. Shepherd & Sons Roofing Paradise is not affiliated with IKO.
- Every job is backed by our written 90-Day Done Right Promise, and a live person answers the phone 24/7.
Which IKO Models This Applies To
Here’s the part most homeowners don’t know: IKO doesn’t publish a gutter product line the way they publish shingle lines like Dynasty, Cambridge, or Armourshake. What you’re actually matching is the roof edge assembly – the drip edge, the fascia, and the gutter hanger spacing – to the shingle profile that sits above it. That matters because IKO’s architectural shingles, including the Cambridge and Dynasty lines, are heavier per square than a standard three-tab, and a gutter run that sags under a heavier roof load is usually a hanger problem, not a gutter problem.
To identify what you have, look at the shingle wrapper first, then measure. The shingle wrapper tells you the IKO line and the warranty terms. Then measure your gutter run in linear feet, note whether it’s a 5-inch or 6-inch K-style profile, and count the downspouts. Write down the hanger spacing – most installations are on 24-inch centers, but a heavier IKO shingle system often holds up better on 16- to 18-inch centers in Paradise’s heat.
On the OEM-versus-aftermarket question, be practical. Since IKO isn’t making the gutter in most cases, you’re choosing between a name-brand gutter coil and hanger system from a supplier we trust and a cheaper generic. We install products from GAF, Owens Corning, CertainTeed, and IKO roofing systems every week, and the same rule applies to gutters: the hanger and the fastening earn the lifespan, not the label.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your IKO Gutter Replacement Is Failing
- Rust streaks on the fascia behind the gutter. Water is getting behind the gutter rather than into it, usually from a seam that opened or a back-edge that was never caulked properly. Left alone, that rust reaches the fascia board and then the roof deck edge.
- Gutter pulling away from the roofline. The hanger either pulled out of soft fascia wood or was spaced too far apart for a heavier IKO shingle system. This is the one that starts a roof edge leak if it isn’t caught.
- Overflow at the corners during a monsoon. In Paradise the storms come fast and hard, and a 5-inch gutter with too few downspouts can’t move the volume. Overflow at a corner is a sizing problem, not a clog, more often than people expect.
- Sagging between hangers. Heat and sun exposure soften the hanger over time, and a run that sags between fasteners will pool water and accelerate corrosion. Paradise’s summer heat is genuinely hard on metal hardware.
- Water pooling at the foundation edge. Downspouts dumping too close to the house push water into the soil line. That’s a drainage and grading issue that shows up as a gutter failure symptom.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed gutter replacement in Paradise runs roughly $1,450 to $3,900 for a standard house, and the range comes down to three things: total linear feet, how many stories the crew is working on, and whether you’re choosing aluminum, steel, or a heavier gauge coil. Seamless aluminum is on the lower end. Heavier gauge and longer runs push toward the top. A 6-inch upgrade on a large roof with heavy runoff sits at the upper end.
| Item | Typical Installed Range |
|---|---|
| Seamless aluminum gutter, 5-inch, typical one-story run | $1,450 – $2,400 |
| 6-inch upgrade for large roof area or heavy monsoon runoff | $2,100 – $3,200 |
| Downspout additions or rerouting | $150 – $450 |
| Fascia repair behind failed gutter | $200 – $650 |
Nothing is hidden. The bid lists linear feet, gauge, hanger spacing, downspout count, and fascia repair separately, so you can see exactly where the money goes. Labor and material are broken out. The work is backed by our written 90-Day Done Right Promise – if it’s not done right, one call brings us back. Free Second Opinion on any written estimate you’re holding from someone else, and no trip charge inside our own county.
DIY or Call Us?
An owner can safely check a few things from the ground: look for rust streaks on the fascia, watch where water overflows during a rain, and see whether the gutter sits level against the roofline. What you should not do is climb a ladder onto a two-story roof edge or try to re-hang a gutter system over a sagging fascia. Gutter work at height is where people get hurt, and a gutter that pulls free under load can drop a ladder with it. Bill and his crew are background-checked and the guys on the roof know how to work a roof edge safely.
If your IKO gutter run is failing and you’re in Paradise, call (833) 676-0557. A live person answers, day or night. We’ll come out, look at the fascia and the roof edge, and give you a written number before anyone touches your house.
FAQs
How long does a gutter system last in Paradise? A properly installed seamless aluminum gutter in Paradise typically lasts 20 to 25 years, but the hanger hardware and fastening often fail first because of the heat and sun exposure. The gutter itself holds up longer than the hardware that holds it.
Can my failing gutter be repaired instead of replaced? Yes, in many cases. A localized sag, a single pulled hanger, or an open seam can often be repaired for a fraction of replacement cost. We’ll tell you honestly whether repair or replacement makes more sense on your specific run. Call (833) 676-0557 for a free estimate.
How long does a gutter replacement take? Most residential gutter replacements in Paradise are done in a single day, with larger or two-story runs occasionally stretching to two. The crew is in and out, the work area is cleaned up, and the run is tested before we leave.
How do you source the gutter and hardware for an IKO roof? We work with roofing and gutter suppliers we’ve used for years and source seamless coil and hanger hardware that matches your roof edge profile. We don’t carry parts on a truck – we measure on site and order to fit. Call (833) 676-0557 and we’ll walk you through it.
If you’re holding a written estimate from another outfit and want a straight answer, call (833) 676-0557. Our Free Second Opinion costs you nothing, and a live person picks up every time.
Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.