Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
GAF Metal Roofing in Paradise: What to Know First
We provide independent GAF metal roofing in Paradise: standing seam, metal shingle, corrugated, and aluminum or steel panel systems installed over GAF underlayment and accessory lines, plus repair and coating work on metal roofs already in place. Most metal roof repairs here are finished in a single visit; a full panel replacement or metal roof install typically runs two to five days on a normal Paradise home, weather permitting. On price, we’re not the cheapest bid you’ll get and we won’t pretend to be – we give you a written line-item quote, show you the deck photos before we talk money, and the number doesn’t change once work starts.
This page is for Paradise homeowners who already have a GAF product on the roof, or who are pricing a GAF-backed metal system and want a straight answer about what lasts out here. Call (833) 676-0557 and a live person picks up – not a call center, not a form.
Key Takeaways
- We’re an independent GAF service provider – GAF doesn’t authorize us, we just know their products cold.
- Paradise heat cycling and desert wind load are what actually kill metal roofs here, not the panels themselves.
- Every metal roof job we do is backed by our written 90-Day Done Right Promise.
- Free second opinion on any written estimate, and no trip charge inside our own county.
How GAF Products Fail – and How We Fix Them
GAF is best known for shingles, so most of the GAF systems we touch in Paradise are hybrid assemblies: GAF underlayments, GAF accessory lines, and metal panels or shingles riding on top. Here’s what actually goes wrong, and how the failure differs from what you’d see with Owens Corning or CertainTeed products in the same spot.
- GAF underlayment breakdown under metal (Tiger Paw and similar lines). Under a metal panel, the underlayment takes far more heat than it ever would under shingles. In Paradise summer sun, a low-slope or vented-too-poorly metal assembly can cook the underlayment until it turns brittle and cracks at the fastener lines. The symptom owners notice first is a faint rattle or a drip at the eave after a monsoon. We pull a few panels, inspect the underlayment directly, and replace it with a heat-rated membrane rather than patching over a failing sheet.
- Fastener back-out and gasket failure on GAF accessory fasteners. The neoprene washers on exposed-fastener metal roofs harden in the dry heat and stop sealing within a decade or so. Wind then works the fastener loose. This is where Paradise wind matters – a loose screw at a panel edge is the start of a lifted panel. We replace fasteners with the correct gasket washer, re-torque to spec, and check the whole field, not just the obvious one.
- GAF metal shingle clip and hem issues. Metal shingles rely on clips and hems to stay locked. When the clips are the wrong gauge or get bent during install, panels creep and the seams open. We see this most on re-roofs where the deck wasn’t flattened first. Our fix is to correct the substrate and re-set the clips to the manufacturer’s spec so the wind rating holds.
- Valley and penetration flashing failures. GAF flashing accessories are good products, but they fail at the same places every time: valleys, chimneys, and pipe boots. In Paradise, the failure is almost always the sealant rather than the metal. We re-flash with proper metal-to-metal laps and correct sealant instead of smearing caulk on it.
- Panel paint and coating wear on sun-facing slopes. A south- or west-facing metal roof in Paradise takes the worst of the UV. Chalky paint and fading aren’t just cosmetic – they signal the coating is thinning. Where the metal is still sound, we coat it; where it’s not, we tell you straight.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our GAF Metal Roofing Process
- 1
You call, a real person answers. Day or night, a live person picks up and books a time that works for you. No voicemail, no form.
- 2
Bill comes out and gets on the roof. He measures the roof in squares at the same time – ask any bidder how many they counted – and photographs the deck, the underlayment, and every flashing detail.
- 3
We show you the deck photos before we talk money. Then we hand you a written line-item estimate. You get a free second opinion on any other bid you’re holding.
- 4
Parts decision, made out loud. If a repair calls for GAF OEM accessories, we quote OEM. If a quality aftermarket fastener or flashing does the job safely and saves you money, we say so and explain the trade-off instead of quietly upgrading the bill.
- 5
The work, done to spec. Background-checked crew, Bill and his sons on the roof with the guys, fasteners and clips set to the manufacturer’s pattern so the wind rating actually holds. We pull permits where the work requires it.
- 6
The test and the cleanup. We water-test the repairs and penetrations, walk the roof with you, magnet-sweep the yard for fasteners, and leave the written 90-Day Done Right Promise in your hand. If it’s not right, one call brings Bill back.
What GAF Metal Roofing Costs in Paradise
Real ranges for the GAF metal work we do in Paradise. Every number below is a range, not a quote – your roof, pitch, and panel count set the actual figure, and we put it in writing before anyone touches the roof.
| Job | Typical range |
|---|---|
| Metal roof repair (fasteners, flashing, small panel) | $250 – $900 |
| Underlayment replacement under metal (section) | $600 – $2,000 |
| Metal roof coating (sound panels, full roof) | $1,500 – $4,500 |
| Metal shingle or panel re-set / re-clip | $800 – $2,500 |
| Standing seam metal roof, full install | $12,000 – $28,000 |
What moves the price: roof size in squares, pitch and how many stories, how much deck repair the photos reveal, whether we’re using GAF OEM accessories or quality aftermarket, and whether permits are required. Standing offers always apply: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside our own county, and a senior and veteran 10% discount. Call (833) 676-0557 to schedule your free estimate – the number’s free and it doesn’t change after we start.
See the difference
Before
After
Before
After
Before
AfterWhy Paradise Homeowners Call Shepherd & Sons Roofing Paradise for GAF Work
Because we’ve been the same locally owned, owner-operated outfit since 1996, at the same address the whole time, while the storm chasers roll through after every hailstorm and disappear. Bill’s name is on the work and he answers his own phone – a live person, day or night. The crew is background-checked and Bill’s own sons are on the roof with him. We install and service GAF products alongside Owens Corning and CertainTeed, so if your metal roof is GAF-backed and the rest of your assembly isn’t, we already know the difference. Every metal roof job – repair, coating, or full install – carries the written 90-Day Done Right Promise: if it’s not done right, we make it right. As an independent GAF service provider, our reputation rides on doing your roof the way we’d do our own.
FAQs
GAF’s coverage depends on the specific product and the conditions of installation, and it’s the manufacturer’s warranty, not ours. We install and repair to the manufacturer’s spec – correct fasteners, clips, and underlayment – so the warranty stays valid, and we back our own work with the written 90-Day Done Right Promise. Call (833) 676-0557 for a free estimate and a straight read on what your product covers.
Yes – GAF accessory lines and the correct OEM fasteners and flashing for metal assemblies are available, and we source them for the job. Where a quality aftermarket part does the same job safely and costs you less, we’ll tell you and let you choose. Call us for a free estimate.
Repair is usually the right call when the panels and coating are sound and the failure is at fasteners, flashing, or underlayment – that’s most of what we see in Paradise. Replace when the panels themselves are failing across the roof or the deck underneath is compromised. We show you the deck photos and give you both numbers. Call (833) 676-0557 to schedule your free estimate.
We book your estimate at a time that works for you, and a live person answers whether you call day or night. Repairs are typically handled in a single visit; full installs run a few days depending on weather. Call us for a free estimate.
Where the work requires a permit, we pull it and the inspection passes before we call the job done. It’s part of doing it right – ask the storm chasers who’s pulling yours. Call (833) 676-0557 for a free estimate.
Get Your Free GAF Metal Roofing Estimate in Paradise
If you’ve got a GAF metal assembly on your Paradise roof and something’s not right – a drip after a monsoon, a rattle at the eave, fasteners backing out, or a coating that’s gone chalky – call us. We’ll get on the roof, show you the deck photos, and put a straight written number in front of you before anyone touches a thing. Free second opinion on any estimate, no trip charge inside our own county, and a live person on the line whenever you call. Call (833) 676-0557 today for your free estimate.
Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.