A Shepherd company - serving Paradise, NV

Boral Gutter Replacement in Paradise, NV

Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

We have financing partners for your new roof*On approved credit; ask us about your options
Get your free estimate

Boral Gutter Replacement: The Paradise Owner’s Guide

If your Boral gutter run is sagging, pulling away from the fascia, or dumping water against the foundation, a full replacement run in Paradise typically runs $14 to $28 per linear foot installed, and most single-story homes get it done in a day. We install Boral-compatible gutter systems and match the profile and hanger spacing to what’s already on your house. We’re an independent installer, not affiliated with Boral, so the advice below is about fit and failure, not a sales script.

Call (833) 676-0557

Most Paradise owners figure out something’s wrong the same way: a streak of rust-stained stucco under a seam, a downspout that drips long after the rain stops, or a splash line eating a trench along the slab. In the older single-story neighborhoods around town, 20-plus years of sun and monsoons has had plenty of time to work on seams and hangers. The gutter itself rarely fails all at once. It tells you first.

Which Boral Models This Applies To

Boral makes gutters in a few profiles, and the profile is the whole ballgame. Most Paradise homes have either a K-style (also called ogee) run or a half-round, and the two don’t swap without reworking the hangers and often the fascia. Before we quote anything, we measure the top opening and the depth of the existing run, check the hanger spacing, and look at how the end caps and outlets are formed. Those three numbers tell us which Boral line matches.

Here’s a compatibility gotcha worth knowing: Boral half-round runs sometimes use a slightly different hanger and outlet geometry than the K-style line, so an off-the-shelf hanger that fits one won’t seat correctly on the other. That’s a common reason a “simple” re-hang starts leaking at the seams a season later. If a label is still visible on the back of the gutter or inside a downspout, read it before anything gets torn off; once it’s in the dumpster, matching gets harder.

The OEM-versus-aftermarket decision for Boral usually comes down to color and availability. Genuine Boral profile and end caps give you the exact factory match, especially on the deeper half-round runs. A quality aftermarket equivalent in the same gauge and profile works fine for straight runs and most repairs, and it’s often faster to get. We’ll tell you which is which on the quote and let you decide. This page covers the Boral work. We also install and repair GAF, Owens Corning, and CertainTeed systems, so if your home has a mix, that’s fine.

Explore

Styles & brands we work with

  • Architectural shingles
  • Metal roofing
  • Tile roofing
  • GAF
  • Owens Corning
  • Flat & low-slope

Signs Your Boral Gutter Replacement Is Failing

  • Sagging between hangers. The gutter is pulling away from the fascia because the hangers have loosened or the fascia behind them has softened from years of overflow. Left alone, the run keeps dropping until water runs behind it into the wall.
  • Seam separation and drip lines. Seams that open up are usually a sign of thermal movement from Paradise’s hot days and cool nights working the joint loose. Once a seam leaks, it wicks into the fascia board and the rot starts from the back.
  • Rust streaks and pinholes. Steel-backed runs rust from the inside out because debris holds moisture against the metal. If you can see brown streaks on the stucco, the coating has already failed on the inside face.
  • Overflow at the corners even when the gutter’s clean. That’s a pitch or sizing problem, not a clog. An undersized run or a run that’s tilted the wrong way spills at the corners no matter how often you clear it.
  • Downspout staining and foundation splash. Water dumping too close to the slab is the symptom that matters most. It shows the downspout run or the outlet isn’t carrying water where it needs to go.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Paradise, plan on the following installed ranges. These are rough numbers, and the final quote depends on your access, height, and how much fascia repair turns up.

Item Installed range
K-style aluminum, per linear foot $14 to $22
Boral half-round, per linear foot $20 to $28
Downspout, per linear foot $8 to $14
Hangers and re-hang, per run $150 to $400
Fascia repair, if rot is found $25 to $45 per linear foot

What drives the range: profile and gauge, the number of corners and outlets, hanger spacing, and whether the fascia behind the gutter is sound. We quote parts and labor on the same line so you see what the gutter costs and what the install costs, and you sign one fixed number with no change orders. The 90-Day Done Right Promise is in writing on every job. If a seam we set starts leaking, one call brings us back.

DIY or Call Us?

Some of this you can safely check yourself. Walk the run from the ground and look for sag or separation from the fascia. Check the pitch with a level if you can reach it safely. Clear the debris and see if the overflow stops. Those are the right first steps, and they cost you nothing.

Where DIY goes wrong: most of the risk is on the ladder and at the fascia, not in the gutter itself. Setting a long run to the right pitch, sealing seams so they hold through a monsoon, and opening up rotted fascia all take a second person, proper hangers, and a working knowledge of the profile. And if the fascia’s soft, installing new gutter over it just hides the problem. If you’re not comfortable on a ladder, don’t get on one. We’ll check it for you and give you a free second opinion on any written estimate. Call (833) 676-0557.

FAQs

How long does a Boral gutter run last in Paradise? A properly pitched, well-hung Boral aluminum run typically lasts 20 to 30 years here, but the seams and hanger attachment point are what fail first, usually well before the metal does. Keeping debris off it and checking pitch after big storms is what gets you to the top of that range. Call (833) 676-0557 for an exact quote on your run; estimates are free.

Can my failing Boral gutter be repaired instead of replaced? Often yes. If the run is sound and only a hanger or a seam has let go, a repair costs a fraction of a replacement and solves the leak. If the coating has failed in several places or the fascia behind it has rotted, replacing the run is the better money. We’ll show you which one you’ve got before we quote.

How long does the swap take? A single-story run on a typical Paradise home is usually done in a day, including tear-off and cleanup. Two-story sections, tight access, or fascia repair push it to a day and a half. We’ll give you a real window when we quote it.

How do you source the Boral part? We match the profile, gauge, and hanger spacing to what’s on your house, then order the genuine Boral parts or a quality aftermarket equivalent to fit. We don’t carry parts on a truck. What you get is ordered for your run, so the fit is right the first time.

The free estimate is the right next step. We’ll measure the run, check the pitch, look at the fascia, and hand you one fixed number with no change orders. If you’ve got a written estimate from someone else, we’ll give you a free second opinion on it. Call Shepherd & Sons Roofing Paradise at (833) 676-0557 to schedule your free estimate.

Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.

Need Roofing help nationwide? Licensed & insured · free written estimates
Call (833) 676-0557
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Shepherd & Sons Roofing Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch