Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Repair in Paradise: What to Know First
We provide independent Boral roof repair in Paradise, and most Boral jobs we see are single-day fixes once we know what we’re dealing with. A leak repair, flashing repair, vent boot replacement, or valley repair typically runs between $285 and $1,150. Full shingle replacement on a Boral-clad roof is a different animal, and we’ll get to that. The price posture is simple: free estimate, written line-item quote, and no trip charge inside our own county. If you’ve got another roofer’s written estimate in hand, we’ll give you a free second opinion on it before you sign anything.
This page is for Paradise homeowners who own a Boral roof – or suspect they do – and need someone who knows the difference between a Boral failure and a generic shingle problem. We’ve been on Boral roofs since the material started showing up on retirement-community builds in the 1990s, and we know how these products age in high-desert heat. Call (833) 676-0557 and a live person picks up, any hour.
How Boral Products Fail – and How We Fix Them
Boral makes several things that end up on Paradise roofs, and they don’t all fail the same way. Here’s what we actually see in the field.
- Boral Steel shingle panels – lifted seams. The stamped steel panels are great until a fastening point backs out. Then the seam lifts, water gets behind it, and the panel starts oil-canning in the afternoon heat. We see this most on west-facing slopes where surface temps push past 160°F. The fix is refastening with the correct pan-head screw at the panel tab and resealing the seam, not driving a roofing nail through the face.
- Boral composite slate – chipped corners at the rake. It’s a heavy composite, and when a rake edge isn’t supported correctly, tiles crack at the corner where wind lifts them. We reset broken pieces on a proper starter and backer, then check the entire rake edge for the same weakness instead of patching the one tile you can see.
- Boral concrete tile – efflorescence and hairline cracking. Our water is hard and our soil moves. Concrete tiles that were laid on an undersized underlayment let moisture wick, then chalky white efflorescence shows up. That’s usually an underlayment problem wearing a tile problem’s clothes. We look underneath before we touch a tile.
- Boral flat-tile / low-slope profiles – wind-scoured fasteners. On the wind-driven slopes above the valley, fasteners scuff their washers over 20-30 seasons. Once the washer goes, the fastener is a leak waiting on a monsoon. We re-plate the perimeter and inspect the field pattern from the deck up.
- Boral underslab and deck screws pulling through panels on 2x skip-sheathing. On older Paradise homes with spaced sheathing, a screw that lands between boards has nothing to hold. We map the framing first so the fastener hits wood, never air.
The pattern behind most Boral failures in Paradise isn’t the product – it’s the deck, the underlayment, and the install detail around it. Boral’s own site will tell you the warranty language. It won’t tell you which slope on which side of your house is the one that’s going to move first.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Boral Roof Repair Process
- 1
The call. You call, a person answers. We ask what you’re seeing – water stain, lifted tile, missing shingle, noise in wind – and set a time to come out. No trip charge inside our own county.
- 2
The look. We get on the roof and photograph the deck from underneath where we can, and from the top where we can’t. You see the photos before we talk money.
- 3
The parts decision. On a Boral repair we try hard to use matching OEM profile and color where it’s available. Sometimes it isn’t, and the honest answer is a quality aftermarket piece that color-matches closer than a discontinued Boral run. We tell you which it is and why, in writing.
- 4
The repair itself. Flashing cut and sealed, valley woven or cut to the slope, vent boot set over a fresh boot collar, shingle or tile replaced, fasteners re-plated – depends on what the photos showed.
- 5
The test. We run water where it makes sense, and we look at the underside of the deck after. You don’t sign off until you’ve walked it.
- 6
The 90-Day Done Right Promise. In writing, on every job. If it isn’t done right, one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Repair Costs in Paradise
| Job | Typical range |
|---|---|
| Vent boot replacement | $285 – $385 |
| Flashing repair (chimney or wall) | $385 – $650 |
| Valley repair (woven or cut) | $450 – $950 |
| Leak repair – locate and seal | $325 – $725 |
| Flat roof patch (low-slope section) | $450 – $1,150 |
| Shingle replacement – partial field | $650 – $2,400 |
What moves the number: pitch and access, whether we’re on tile or steel (removal is slower than shingle), whether the leak is actually at the seam you think it’s at, and whether matching OEM material shows up in time. Written line-item quote, no change orders mid-job unless we find something and show you first.
Why Paradise Homeowners Call Shepherd & Sons Roofing Paradise for Boral Work
Same address since 1996. Bill’s name is on the work and he answers his own phone. A live person picks up 24/7, including after a storm when you’re standing in a wet hallway. The crew is background-checked and Bill’s own sons are on the roof with him. We install Boral, GAF, Owens Corning, and CertainTeed, so we’re not committed to one label – we’re committed to the right repair for your roof. Proudly serving Paradise for over 29 years, with a free second opinion on any written estimate and a Senior and Veteran 10% discount that never disappears. Our technicians have up to 30 years of experience on Boral and comparable products.
FAQs
Usually not, if the repair is done to spec – but it can. Boral’s warranty typically requires repair by a qualified installer using compatible materials, and an improper repair can void a claim on that section. We document what we did and why, so you’ve got the paper trail. Call (833) 676-0557 for a free estimate and we’ll talk through your specific product first.
Often, yes – especially on current Boral profiles. On discontinued runs, we get as close as the market allows and we show you the match in daylight before we order. As an independent Boral service provider, we can’t promise a perfect color match from the factory, and we won’t pretend otherwise.
Repair is usually the right call on isolated failures – one lifted seam, one chipped tile, one failed boot. If we find more than surface damage on the inspection – soft deck, widespread fastener wash, or underlayment that’s already failed – we’ll tell you straight and give you both numbers. We don’t upsell repairs into replacements.
For active leaks, we aim to be out within a day, weather and schedule allowing. Live person answers 24/7, so if it’s storming at 2 a.m., someone picks up. No promised dispatch times – just a real person who’ll give you an honest window.
No, unless we find something on the deck we couldn’t see from the initial inspection – and then we show you the photo before we touch anything. Written quote, no change orders behind your back.
Got a Boral roof in Paradise that needs a second look? Call (833) 676-0557 to schedule your free estimate. We’ll be there, and we’ll show you the deck photos before we talk money.
Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.