Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Tamko Gutter Replacement: The Paradise Owner’s Guide
Tamko-compatible gutter replacement in Paradise typically runs $1,450 to $3,200 installed for a whole-house run, or $220 to $480 for a single damaged section, and we can usually get out to look at it within a few days of your call. The price depends on the footage, the number of stories, and whether the hangers and fascia underneath are still sound. Most Paradise owners find out something’s wrong after the first hard rain of the season, when water starts sheeting off a corner instead of running to the downspout, or when they see a seam separating from the roofline. Call us at (833) 676-0557 and we’ll come measure it, show you what failed, and give you a written number before anyone touches the house.
Which Tamko Models This Applies To
Tamko makes roofing shingles far more than it makes gutters, and that trips people up. If you’re searching for “Tamko gutter replacement,” you likely have a Tamko Heritage or Titan shingle roof and a gutter system that was installed alongside it, or a metal gutter run that a previous contractor matched to the roof line. Tamko’s actual gutter-adjacent products show up most often as drip edge and eave trim, and those pieces are size-specific: the standard is a 2-inch by 4-inch drip edge, but some Tamko trim profiles run 2.5-inch on the face, and if you buy the wrong one it either won’t tuck behind the shingle course or it’ll leave a gap at the fascia that water finds in about a month. The way to identify what you actually have is to look at the drip edge profile from the ground with binoculars, measure the face width, and check inside the attic at the roof edge for the original installation stamp. OEM Tamko trim is matched to the exact profile and color; quality aftermarket equivalents from a mill that rolls to the same spec do the same job for less, and we’ll tell you honestly which one your house needs. We install products from GAF, Owens Corning, and CertainTeed as well, so if your roof is mixed-brand we can still match the gutter to what’s up there.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Signs Your Tamko Gutter Replacement Is Failing
- Seams pulling apart at the corners. The sealant at inside and outside corners dries out faster in Nevada’s dry heat than in wetter climates, and once that bead cracks, water runs behind the gutter and down the fascia. In Paradise we see corners fail in five to seven years, where a coastal install might last twice that.
- Gutter sagging away from the fascia. This is almost always a hanger problem, not a gutter problem. The hanger spacing was too wide for the snow load or the fascia board has softened from a slow leak, and once one hanger lets go the run pulls the rest with it.
- Water sheeting over the front lip during rain. That’s either a pitch issue or a downspout that’s undersized for the roof area draining to it. A 2×3 downspout handling 600 square feet of roof in a heavy Paradise monsoon will overflow every time.
- Rust streaks or pinholes on a metal run. Older steel gutters rust from the inside out, and by the time you see a pinhole on the face, the bottom pan is usually worse. Aluminum doesn’t rust but it does oxidize and chalk, which tells you it’s aging out.
- Staining on the fascia board or siding below the gutter. This means water has been running behind the gutter for a while, and the wood is probably soft. If you can push a screwdriver into the fascia with light pressure, the repair just got bigger than a gutter swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what gutter work runs in Paradise, itemized so you can compare apples to apples:
- Aluminum seamless gutter, installed: $9 to $14 per linear foot, depending on color and gauge.
- Steel gutter, installed: $12 to $18 per linear foot.
- Downspouts: $8 to $14 per linear foot, with extensions and splash blocks quoted separately.
- Fascia repair or replacement where it’s soft: $6 to $11 per linear foot.
- Hanger upgrade to screw-in or hidden hangers: $2 to $5 per hanger.
What drives the range up is height (two-story runs cost more because of setup and safety), the amount of old material to haul off, and whether the fascia underneath is sound. We give you a written line-item quote, not a lump sum, so you can see what’s parts and what’s labor. Every gutter job carries our 90-Day Done Right Promise in writing, and right now we’re running $40 off any repair over $200, plus 10% off for seniors and veterans. No trip charge if you’re inside our own county.
DIY or Call Us?
There’s a real split here, and I’ll be straight with you about it. You can safely walk the perimeter with binoculars and check pitch (it should drop about a quarter inch per 10 feet toward the downspout), clear debris, and look for obvious sag or separation. What you shouldn’t do is climb a ladder onto a two-story roof line, pull a gutter section loose, or try to re-hang a run by yourself. Ladder falls are the number one reason homeowners end up in the ER, and a gutter full of water is heavier than it looks. The other thing DIY gets wrong every time is the drip edge: if it isn’t tucked correctly behind the shingle course, you’ll have water running behind the gutter and into the fascia within one season. That’s not a gutter problem you can fix after the fact without pulling shingles. Call (833) 676-0557 and Bill will come out, show you the photographs, and tell you honestly whether it’s a repair or a replacement. Free second opinion on any written estimate you’ve already got.
FAQs
Aluminum gutters last 20 to 30 years in Paradise’s climate, while steel runs 15 to 20 because of the heat cycling. The desert sun and the freeze-thaw we get in the winter months both work on the sealant and hangers faster than most national averages account for, so plan on re-caulking seams around year eight. Call (833) 676-0557 if yours is past that mark and you’re seeing separation.
Yes, if it’s isolated to a seam, a hanger, or one section of downspout. A $220 to $480 repair usually handles a localized failure, and we’ll tell you if that’s what you need rather than pushing a full replacement. Once the fascia is soft or the rust is through the pan, replacement is the honest answer. Call (833) 676-0557 for a look.
A typical single-story Paradise home runs one to two days for the full run, and a single section swap is often done in an afternoon. Two-story homes or jobs with fascia repair add a day. We’ll give you the schedule in writing with the quote. Call (833) 676-0557 to get on the schedule.
We order the drip edge and trim to your measured profile from suppliers who carry the Tamko line, so it’s matched to what’s already on your roof rather than a generic piece that won’t tuck correctly. We don’t stock parts on a truck and we don’t claim to; every piece is ordered for your job. Call (833) 676-0557 and we’ll confirm what your house actually needs.
If your gutters are letting water run behind the fascia instead of away from the house, that’s a problem worth catching before the wood goes soft. We’re Shepherd & Sons Roofing Paradise, locally owned and owner-operated, and we’ve been at the same address since 1996. A live person answers the phone around the clock, including after a storm, and you’ll get a free second opinion on any written estimate you’ve already collected. We come out, show you what’s wrong, and put the price in writing before anyone touches your roof. Call (833) 676-0557 to schedule your free estimate.
Written by the team at Shepherd & Sons Roofing Paradise, serving Paradise and nearby areas.