Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Gutters & Accessories in Paradise: What to Know First
We install, repair, and replace CertainTeed gutters and accessories in Paradise, and most jobs close out in a day or two once the parts are on hand. Our technicians have up to 30 years of experience and install products from CertainTeed, GAF, Owens Corning, IKO, Atlas, Tamko, and Boral, so we can also tell you when a CertainTeed system is the right call and when it isn’t. We’re an independent CertainTeed service provider, not authorized or affiliated with CertainTeed, and we’ll give you a free estimate with line-item pricing before anyone touches your roofline. Call (833) 676-0557 for a free estimate.
This page is for Paradise homeowners who already have CertainTeed products on their house, usually from a past roof install or gutter replacement, and who now need hangers, guards, downspouts, or fascia patched or replaced. If you’re pricing this work, tell us what’s stamped on the hanger or the downspout so we know what we’re matching.
How CertainTeed Products Fail – and How We Fix Them
Every brand has its patterns. Here’s what we actually see on CertainTeed jobs around Paradise.
- Hidden hanger screws backing out of rafter tails. On CertainTeed aluminum systems, the hanger screw is small and the hole strips easily if the installer overdrives it. Once the screw spins, the hanger drops a quarter inch and the trough sags. We pull the hanger, fill the stripped hole, and re-set it in solid wood with a screw long enough to bite the full rafter tail.
- Seam failures on site-cut runs. CertainTeed gutter coil is fine material, but site-cut seams on longer runs open up when summer heat expansion works them. We see this most on south-facing runs. The fix is a clean re-seam with sealant and a riveted slip joint, or replacing the run with seamless on-site forming so there’s no seam to fail.
- Clogged guards before the guard itself is bad. A CertainTeed leaf guard with pine needles packed tight against the screen looks like a failed guard. It’s usually a pitch problem: the trough has tilted slightly over years of freeze-thaw and the guard sits too flat. We reset pitch and re-secure the guard rather than sell you a new one.
- Downspout pop-outs at the elbow. The crimp on the lower elbow loosens and heavy rain sends the joint apart, dumping water at the foundation. We re-crimp the elbow and add a screw through the joint so the next storm stays together.
- Fascia rot behind the hanger. CertainTeed hangers hide rot well. If the fascia behind a run is soft, the hanger never holds no matter how many times it’s re-set. We pull a section, show you the wood, and fix the fascia before we hang anything back on it.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our CertainTeed Gutters & Accessories Process
- 1
We walk the run with you. You’ll see the deck photos and the hanger condition before we talk money. No guessing.
- 2
We match the parts. If CertainTeed OEM hangers or guards are still available, we use them so the system stays as it came from the factory. If a certain piece is discontinued or back-ordered weeks out, we say so and walk you through a quality aftermarket match that fits the same profile.
- 3
We fix the cause, not just the symptom. Soft fascia gets replaced, pitch gets reset, stripped holes get filled.
- 4
We install or repair. Hangers, troughs, guards, elbows, and downspout runs set solid and screwed at every joint.
- 5
We test with water. Garden hose on the highest point of the run, and we watch the water travel all the way to the splash block before we call it done.
- 6
We guarantee it in writing. Every roofing job, gutter work included, gets our 90-Day Done Right Promise. If it’s not done right, we make it right and one call brings Bill back.
See the difference
Before
After
Before
After
Before
AfterWhat CertainTeed Gutters & Accessories Costs in Paradise
Here’s honest pricing for the common CertainTeed scenarios. Every job gets a written line-item quote before work starts, and the price on the quote is the price on the invoice. No change orders at the door.
- CertainTeed hanger re-set or replacement (per hanger): $18 – $35 each, typically 6 to 20 hangers per run.
- Downspout elbow repair or re-crimp: $85 – $160 per joint.
- Seam re-seal or rivet repair: $120 – $250 per seam.
- CertainTeed gutter guard reset or removal: $200 – $500 per run.
- Fascia repair behind the hanger line: $350 – $1,200 depending on the length.
- Full seamless gutter replacement, per linear foot: $7 – $14 installed, guards and downspouts extra.
What moves the price: roofline height, whether the fascia behind is solid or rotted, OEM vs aftermarket parts availability, and how long the run is. Free estimate, no trip charge inside our own county. Call (833) 676-0557.
Why Paradise Homeowners Call Shepherd & Sons Roofing Paradise for CertainTeed Work
Same address since 1996, same name on the truck, same owner on the roof. Ask the storm chasers where theirs is. When you call, a real person picks up 24/7, not a voicemail and not a call center, including after a storm when you need an answer fast. Bill Shepherd and his crew have set CertainTeed alongside GAF and Owens Corning jobs for years, and they know which pieces match which profile without guessing. Our work is backed by the written 90-Day Done Right Promise on every roofing job, and we carry a Free Second Opinion on any written estimate so you can compare line by line. Senior and Veteran 10% discount is always available, and we’ve got no trip charge inside our own county.
FAQs
In most cases, no, as long as the aftermarket part is compatible and installed correctly, but you’ll want the paperwork to show it. CertainTeed’s warranty on gutter components covers manufacturer defects, not installation errors, so the installer’s work matters more than whose box the hanger came out of. We document every part we install so you have a paper trail if a claim ever comes up. Call (833) 676-0557 for a free second opinion on your current setup.
Most standard profiles are, but some discontinued pieces take weeks to order. CertainTeed hangers, guards, and downspouts in the common residential profiles are usually available through supplier channels, but a few pieces in older systems have been phased out. When that happens, we tell you up front and show you the closest quality aftermarket match before you commit. Call (833) 676-0557 and we’ll check availability for your specific system.
Most CertainTeed systems can be repaired if the trough itself is sound. If the hangers are sagging, seams are open, or a guard is sitting flat, those are all fixable parts, and repair usually costs a fraction of replacement. Replacement makes sense when the trough is cracked, the fascia behind is rotted along most of the run, or several failures happen at once. We’ll walk the run with you and tell you straight which one you’re looking at. Call (833) 676-0557 for a free estimate.
Most non-emergency CertainTeed gutter jobs can be scheduled within a few business days, and emergencies get faster attention. A live person answers the phone 24/7, so we can talk through the problem and get you on the schedule without a callback delay. Call (833) 676-0557 and we’ll give you a real timeline, not a promise we don’t keep.
Yes, in nearly every case, and if we can’t match it we’ll tell you before we order. CertainTeed runs a full color line for gutters, and matching an existing run is usually just a matter of pulling a sample and checking the color code. If your color is discontinued, we’ll show you the closest match and let you decide. Call (833) 676-0557 for a free estimate on a color-matched match.
Written by the team at Shepherd & Sons Roofing Paradise.