Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Winchester
If you own a low-rise motel, an apartment block, or a home near the airport edge of Winchester, you already know the roof is the part of the building the desert punishes hardest. We work metal roofing in Winchester, NV and the neighborhoods around Las Vegas Boulevard and the airport corridor, and we know how these mid-century flat roofs and their parapets actually fail. When heat, UV, and the short monsoon bursts do their damage, you’ll want a straight answer and a written number. Call (833) 676-0557 and a live person picks up, day or night.
Why Shepherd & Sons Roofing Paradise Is Winchester’s Preferred Metal Roofing Company
Winchester roofs don’t look like the rest of the valley’s, and we treat them that way. Much of the building stock here is low-rise commercial, motel, and multifamily, packed between the resort towers and the airport, so flat and low-slope assemblies with parapets and dense rooftop HVAC units are the norm. We’ve spent a lot of time on those roofs, and we’ve learned where the leaks hide.
Our technicians have up to 30 years of experience, and every job is backed by our written 90-Day Done Right Promise: if it’s not done right, we make it right, and one call brings us back. We show you photos of the deck before we talk money, and we measure a roof in squares – ask any bidder how many they counted. No trip charge inside our own county, a free second opinion on any written estimate, and honest upfront pricing so you know the number before anyone touches your roof.
Winchester homeowners and property managers call us because the name on the license is the name that shows up. That matters after a monsoon when the phone should be answered by a real person, not a call center.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Winchester
Metal is the right path for a lot of Winchester roofs, and it’s why so many flat-roof buildings here are getting re-roofed in metal instead of replaced in kind. Here’s how we break it down.
Standing Seam Metal Roof
Standing seam is the upgrade we install most on Winchester’s low-rise motel and apartment stock, where flat parapet-lined roofs and rooftop HVAC units are the default. Concealed fasteners and raised seams handle the desert heat cycling far better than exposed screws. Our Metal Roofing team sets new flashing at every parapet and penetration so the seams stay tight through the monsoon.

Metal Shingle Roofing
On the residential side of Winchester, where a steeper pitch meets a low-slope transition, metal shingles give you the look of a shingle roof with the lifespan of metal. They’re a good fit when the old 1990s shingle roof is failing and the fascia underneath has gone soft. We check the drip edge before we quote, because that’s where the surprise usually hides.

Corrugated Metal Roofing
Corrugated panels are the workhorse option for sheds, carports, and the simpler commercial roofs around Winchester. UV and heat cycling wear on the fastener washers over time, so we spec washers rated for the desert sun. It’s an economical choice when the deck is sound and the slope is right.

Aluminum & Steel Roofing
Aluminum and steel each have a place on Winchester roofs. Steel brings strength for larger commercial spans, and aluminum resists corrosion near the airport corridor. We’ll tell you which one suits your building instead of upselling the wrong panel.
Trusted Brands We Service in Winchester
We install metal and roofing products from names you can look up, including Owens Corning, IKO, and Tamko, alongside the metal panel systems we set on Winchester flat-roof buildings. We don’t keep a warehouse of parts sitting around, but we know the products, we know what holds up in this climate, and we get you a clear answer on turnaround quickly. Name the panel and we’ve likely set it.
Common Metal Roofing Problems We See in Winchester Homes
These are the failures that show up again and again on Winchester roofs, and each one has a cause you can trace.
- Ponding at drains and parapet corners. After a monsoon burst, water pools where slope is too shallow and exposes failed sealant on a metal retrofit laid over an aging built-up deck. That standing water is what starts the leaks.
- Leaky AC curbs and penetrations. Rooftop condenser curbs leak where flashing and underlayment weren’t rebuilt during a metal install. Every penetration has to be flashed fresh, not patched over.
- UV and heat-cycling wear. Years of desert sun crack the coating and fatigue the fastener washers on corrugated and metal shingle panels. That’s how seams and valleys open up.
- Hidden fascia and drip-edge rot. When we strip a failing shingle roof on a Winchester home, rotten fascia and a compromised drip edge often surface underneath. You only find it once the old material is off, so we look first.
See the difference
Before
After
Before
After
Before
AfterHow We Handle Surprises on a Winchester Metal Roof
Opening up an older Winchester roof turns up things you can’t see from the ground, and that’s the single biggest reason a metal roofing quote moves. Soft or delaminated decking under decades of built-up membrane, a failed slip sheet, rotted fascia – these surface once the old roof is stripped. We handle it this way: we inspect first, we write allowances into the contract, and any surprise gets priced and approved in writing before we touch it. You hear the number from us, not from a change order after the fact.
That’s also why a metal retrofit here usually starts with a test section. A qualified local pro opens a section to check the decking, then sets a slip sheet and underlayment before installing standing seam panels with new flashing at the parapets and every penetration. On the residential side, stripping a 1990s shingle roof often reveals rotted fascia and a failing drip edge that only show up mid-strip. We plan for it up front so the quote holds.
Pricing for Metal Roofing in Winchester, NV
Metal roofing in Winchester runs roughly $9 to $16 per square foot installed for standing seam, and a metal roof coating typically runs $2.50 to $5 per square foot depending on prep and slope. Metal shingle roofing lands around $10 to $15 per square foot, and corrugated panels run about $6 to $11. What moves the number is the deck condition, how many HVAC curbs and penetrations need new flashing, and whether the parapet caps get rebuilt. On a flat-roof building with soft decking, the test section and repair allowance matter more than the panel choice.
We give you a free estimate with a written, line-item quote and fixed pricing, so the number you approve is the number you pay. Call (833) 676-0557 to schedule yours – estimates are free, and we’ll show you the deck photos before we talk money.
We Also Serve Cities Near Winchester
Winchester keeps us busy, and we also work the communities around it. If you’re just outside town, we cover Metal Roofing in Winchester and the surrounding areas including Paradise, Las Vegas, Whitney, and Sunrise Manor. Same straight answers, same written promise, wherever you are in the valley.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Winchester
Because Winchester’s building stock is overwhelmingly low-rise motel, strip-center, and apartment inventory with flat, parapet-lined roofs and dense rooftop HVAC units. Shingles need a slope; these roofs don’t have one. Standing seam and coated metal panels are the common upgrade because they shed water and handle desert heat cycling on a flat deck. Call (833) 676-0557 for a look at your building.
Compare them on the assembly, not just the panel name – ask each bidder how many squares they counted, what underlayment they’re using, and how they’re detailing the parapets and penetrations. A cheap bid usually skips the slip sheet or reuses the old flashing. Get a free second opinion on any written estimate by calling (833) 676-0557.
Typically soft or delaminated decking under decades of built-up membrane, plus failed waterproofing and occasionally damaged framing around the drains. That’s why we open a test section first, write allowances into the contract, and price any surprise in writing before we touch it. Call (833) 676-0557 to schedule the inspection.
It should spell out new flashing at every parapet and HVAC curb, a fresh slip sheet and underlayment, and how the roof slope will be corrected where it’s too shallow. Missing those details is what causes ponding and curb leaks later. Call (833) 676-0557 and we’ll walk you through what yours needs.
Often yes – metal roof coating runs roughly $2.50 to $5 per square foot and can add years to a roof that’s still structurally sound, especially where UV has cracked the coating and opened seams. If the deck is soft or the ponding is severe, replacement is the better call. Call (833) 676-0557 for a free estimate and we’ll show you which path fits.
Written by the team at Shepherd & Sons Roofing Paradise.