Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Paradise
If you’re looking at a metal roof for a home, shop, or apartment building in Paradise, you’ve probably already figured out that this township doesn’t look like the rest of the Valley. Paradise is unincorporated, the housing went up fast during the Strip’s boom years, and much of what we’re asked to roof sits on flat or low-slope decks. That changes how a metal roof gets scoped, permitted, and installed. We know the Paradise Road and Flamingo corridors, the older tract pockets, and the difference a Clark County permit makes on an acreage lot. Call (833) 676-0557 and a live person will pick up, day or night.
Why Shepherd & Sons Roofing Paradise Is Paradise’s Preferred Metal Roofing Company
We’ve built a straight-dealing reputation in Paradise the slow way: show the deck photos before we talk money, quote the same number we’ll honor, and come back if the work isn’t right. The 90-Day Done Right Promise is in writing on every roofing job. One call brings Bill back. That matters in a town where out-of-state storm chasers roll through after every big blow and vanish before the punch list is done.
Paradise customers tend to be repeat customers or neighbors of repeat customers. We hear it at the hardware store on Saturday: your bidder quoted low on the phone and high at the door. We don’t work that way. Ours is a free estimate with line-item pricing, a free second opinion on any written estimate you already have, and no trip charge inside our own county. When you call, a real person answers, including nights and weekends after a storm.
We know Paradise specifically. Standing-seam runs on a Paradise shop or detached ADU get scoped differently than a tract home on a tight lot, because access, haul distance, and where the runoff has to go all show up in the price. Crews on this work are background-checked and experienced, and the name on the license is the name that shows up. Ask anyone on your street.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Paradise
Standing Seam Metal Roof
Standing seam is the workhorse for Paradise buildings that need to shed heat and monsoon rain without constant patching. On acreage lots, the long panel runs and hidden fasteners hold up better than exposed screws when thermal cycling is the enemy. We measure in squares and show you the count before we talk money.

Metal Roof Repair
Most metal roof calls in Paradise aren’t full replacements. They’re lifted fasteners, seam separation, and worn sealant at penetrations after another 110°F+ summer. A repair done right starts with the underlayment and the butyl, not just a fresh bead over the old one.

Aluminum & Steel Roofing
Aluminum resists corrosion better where condensation sits under a panel on an outbuilding or shop. Steel brings the strength for larger spans and heavier wind loads on open ground. We’ll tell you which fits your building in Paradise rather than which one earns the bigger ticket.

Metal Shingle and Corrugated Metal Roofing
Metal shingle suits Paradise homes that want the look of a pitched roof with metal’s lifespan. Corrugated is the budget-friendly route for shops, sheds, and outbuildings where screw gaskets and panel overhangs do the real work. Either way, the nailing and fastening pattern earns the wind rating, not the panel wrapper.
Trusted Brands We Service in Paradise
We install products from Owens Corning, IKO, Atlas, and Tamko, along with the metal systems our Paradise customers ask for by name. If you name the panel or shingle, we’ve likely set it. We don’t stock parts locally and don’t pretend to; what we do is order the right system for your building and keep the haul schedule honest so your timeline holds. Turnaround on a Paradise metal job depends on panel lead times and permitting, and we tell you both up front.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Paradise Homes
- Seam and fastener fatigue from thermal cycling. Paradise swings from 40°F winter nights to triple-digit summer days, and that expansion and contraction loosens standing-seam clips and flattens screw gaskets on corrugated panels. Left alone, the next monsoon finds the weak spot.
- Condensation and corrosion under panels on outbuildings. A shop or detached ADU that vents warm interior air onto a cold deck can cook the underside of a metal panel, especially when the underlayment wasn’t rated for desert swings. We look under the panel, not just at it.
- Uplift and edge failure at valleys and penetrations. Wind loads on open Paradise acreage run higher than on tight suburban lots, and flashing details get skipped when a crew rushes a tear-off before the dark metal surface tops 150°F. The detail work is where the waterproofing lives.
- Aging flat and low-slope decks under metal retrofits. Much of Paradise went up fast from the 1960s through the 1980s, and original tar-and-gravel flat roofs that have been patched for decades often need a full tear-off before a metal system goes on top.
Pricing for Metal Roofing in Paradise, NV
Metal roofing in Paradise runs roughly $9 to $18 per square foot installed, depending on the system. A standing-seam roof on a typical Paradise home runs about $14,000 to $28,000. A corrugated metal roof on a shop or outbuilding runs about $6,000 to $12,000. Metal roof repair runs $350 to $1,800 for most calls, and a heat-reflective coating runs $1,500 to $4,500 depending on square footage. What moves the number: system type, panel color and finish, deck condition, tear-off of an old flat roof, and access on acreage. Estimates are free, and we’ll show you the deck photos before we quote.
We Also Serve Cities Near Paradise
Metal roofing work in this corner of the Valley reaches past the township line. We also serve homeowners and building owners in Winchester, Whitney, Spring Valley, and Enterprise. If your building sits near any of them and you want to know how our Metal Roofing team scopes a job, call and we’ll talk it through. You can also read more about Metal Roofing in Paradise on our city page.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Paradise
Yes, and this is the detail most bidders skip. Because Paradise is an unincorporated township, metal roofing permits on acreage properties often go through Clark County rather than a city building department, and inspectors may require well and septic clearances before sign-off. That step doesn’t exist for lot-and-block homes inside Las Vegas city limits. We pull the permits and see the inspection through. Call (833) 676-0557 for a free estimate that accounts for it.
Generally yes, and it’s the main reason Paradise customers ask about metal. Metal reflects more of the sun’s load than asphalt shingles or a black flat membrane, and it survives the 40°F-to-110°F swing that bakes and cracks asphalt systems. On a casino-adjacent building or an aging apartment complex with a low-slope deck, a reflective metal or coated system often makes more sense than another round of flat patching.
Because the underlayment and sealant fail before the metal does. On Paradise acreage, a standing-seam roof might show lifted fasteners or seam separation after a decade of 110°F+ summers, especially where a shop or detached ADU vents moist air that condenses on the underside of the decking. The usual fix starts with replacing the underlayment and worn butyl sealant at penetrations, then re-flashing around vents and valleys. Call (833) 676-0557 and we’ll look at what’s under the panel before quoting a repair.
They affect staging, access, and where the runoff can safely go. On a Paradise acreage lot, we plan material staging away from the well head and septic field, and we verify that the drip edge and fascia still shed monsoon runoff clear of both. Getting that wrong is the kind of thing you find out about a season later. We scope it before quoting so it isn’t a surprise line item.
Ask for the square count, the panel or shingle system by name, the underlayment spec, the fastening pattern, and whether tear-off and disposal of an old flat roof are included. Ask who pulls the permit and whether the county will require well and septic clearances. A roof is measured in squares, so ask any bidder how many they counted. Call (833) 676-0557 for a free estimate with all of it in writing.
Paradise metal roofing comes down to a few plain questions: what’s under the panel, what the county needs, and who’s coming back if it isn’t right. We answer all three before anyone touches your roof. Call Shepherd & Sons Roofing Paradise at (833) 676-0557 for a free estimate. A live person answers, and the name on the license is the name on the truck.
Written by the team at Shepherd & Sons Roofing Paradise.